Details

Ingredients

Ingredients - Cane sugar derivatives, proprietary botanical extracts and hydrated cellulose (cleaning agents), purified water and nitrogen propellant (non-flammable & eco friendly.)

Instructions

Suggested Use

Shake can before spraying. Remove excess urine, cat spray, feces, hairballs or vomit first.

Floors (Wood, tile and linoleum. For carpet and grout, use CARPET & UPHOLSTERY)

1. Spray affected areas.
2. Hard floor surfaces may become slick, so wipe dry with clean rag or allow to air dry. (Be careful while walking on wet floors!).
3. Sniff to check that entire affected area has been sprayed.

Floor Trim and Baseboards

1. Spray affected areas.
2. Wipe dry with clean cloth.

Walls

1. Test for color fastness on hidden area.
2. Spray on affected surface.
3. Allow product to air dry or rub into surface with clean cloth.

Tips & Tricks

Walls and Woodwork
Application on walls and woodwork is dependent upon the degree of saturation in the wood. The only requirement for CLEAN+GREEN for Wood/Tile or Multipurpose Mist to work is that the product must come in contact with the odor source. Once it has made contact, it will encapsulate the odor source and eliminate the odor.

Spray CLEAN+GREEN for Wood and Tile or Multipurpose Mist spray directly on the affected area. For added benefits, rub the affected area with a clean rag to increase the penetration of the spray onto surface (e.g. wood, wall, etc.) Allow area to dry, and check to see if odor is completely gone. If odor is not completely gone, the spray may not have come in contact with all of the odor source. Reapply the spray to the area that still has an odor, following all of the directions above.

Note

Wood and wall surfaces are porous and naturally soak up liquids; CLEAN+GREEN will pull the odor source out of the wood and wall with each application, until it is completely gone.